Windshield Phone Holder Car: 7 Mounts That Actually Stay Put (2026)

Somewhere on the A34, at roughly 34 miles an hour, your phone will make a bid for freedom. It’ll peel off the glass, slide down the dashboard, and land face-down in the footwell just as the sat nav voice tells you to “turn left in 200 yards.” If you’ve bought a windshield phone holder car owners quietly recommend to each other in car park chats, this doesn’t happen. If you bought whatever was cheapest at a service station, it probably has.

A windshield phone holder car mount is, at its simplest, a suction-cup or adhesive-based bracket that holds your smartphone at eye level on the glass in front of you, usually on a telescopic or gooseneck arm that swivels to whatever angle keeps your eyes closest to the road. The good ones use a genuine vacuum seal and a locking lever; the bad ones use hope. That distinction matters more in a British summer heatwave, or a frosty January morning, than most buyers realise until the mount is already lying on the passenger seat.

This guide walks through seven real mounts currently sold for UK drivers, spanning honest budget picks to premium wireless-charging options, with straight analysis rather than recycled spec sheets. We’ll also tackle the questions that actually bring people to this page: why a windscreen mount for phone accessories fails in heat, how to fix a suction cup that won’t stick anymore, how to get the telescopic arm adjustment right the first time, and — because it comes up constantly — whether any of this is even legal on UK roads. Short answer: yes, with caveats, and we’ll get into exactly what those are.

Quick Comparison Table

Before the deep dive, here’s the shape of the market at a glance. Every product below is covered in full further down the page.

Reading this table, the split is fairly clean: AUTO-T and Vexloria compete on rock-bottom price, iOttie Easy One Touch 5 and Miracase sit in the sensible middle ground most drivers should actually buy, and ESR and iOttie Easy One Touch Wireless 2 justify their premium by folding a wireless charger into the mount itself. None of these are the same product wearing a different sticker — the suction mechanisms, arm designs, and clamp styles genuinely differ, which is exactly why the wrong pick for your dashboard shape or phone size ends up in the bin within a fortnight.

✨ Ready to stop your phone sliding around? Compare live listings and check current stock below.

Top 7 Windscreen Phone Holders: Expert Analysis

Seven real products, budget through to premium, each with genuine spec interpretation rather than a rewritten listing.

1. iOttie Easy One Touch 5 — best all-round value for daily driving

The standout here is the one-handed locking mechanism: you press your phone into the cradle and the side arms clamp shut automatically, no fiddling with a ratchet while you’re also trying to pull out of a junction. That single feature is why this has stayed one of the best-selling windshield phone holder car mounts for years rather than a flash-in-the-pan.

Specs worth knowing: the telescopic arm extends to just over 17cm and pivots roughly 260 degrees, which in practice means you can position the cradle almost anywhere between the base of the windscreen and eye level without the arm looking stretched or precarious. The reusable suction cup uses a locking lever rather than a simple push-and-hope design, which — as we’ll cover in the transformation section below — is the single biggest factor in whether a mount survives a hot car.

Based on the spec comparison with cheaper alternatives, this sits in an unusual sweet spot: it costs barely more than budget options but includes the locking-lever suction and cradle width (roughly 6-9cm) that budget mounts often skimp on to hit a lower price point. It suits daily commuters and anyone using navigation apps regularly, less so anyone wanting wireless charging bundled in.

Reviewers consistently report that the mount survives motorway speed bumps and potholes without the phone slipping, and the main recurring complaint centres on the plastic cradle release button feeling slightly stiff when cold. That’s a minor gripe against an otherwise dependable design, and it tracks with what you’d expect from a mount built around mechanical clamping rather than magnets or adhesive alone.

Pros:

• ✅ One-handed locking cradle, genuinely quick to use
• ✅ Telescopic arm reaches awkward windscreen angles easily
• ✅ Locking-lever suction cup resists heat far better than basic types

Cons:

• ❌ No wireless charging built in
• ❌ Cradle release button stiffens slightly in cold weather

Sitting around £25 at the time of research, this is genuinely one of the better value-for-money picks in the whole category — you’re not paying a premium tax for a brand name, you’re paying for a suction mechanism that actually works when the cabin hits 50°C in July.

2. APPS2Car Windscreen Mount — best for large phones and thick cases

The standout advantage is sheer cradle capacity: this gooseneck design comfortably swallows phones up to 6.8 inches, including those wearing a rugged case, which trips up several slimmer mounts on this list. If you’ve got a Galaxy S25 Ultra wrapped in a chunky Otterbox-style shell, this is one of the few windscreen mounts that won’t fight you on it.

The gooseneck arm — longer than most telescopic designs — brings the screen noticeably closer to your natural sightline, which matters more than it sounds for anyone who wears varifocals or simply finds low-mounted phones hard to glance at without properly turning their head. The ball joint at the cradle allows a full range of portrait and landscape rotation, and the sticky-gel suction pad is designed to be re-tackified by rinsing under a tap when it starts losing grip.

What most buyers overlook about gooseneck-style mounts is that the extra reach comes with slightly more wobble on rough roads compared with a shorter, stiffer telescopic arm — a fair trade for many drivers, but worth knowing before you buy if you regularly drive potholed B-roads. It’s a strong match for anyone prioritising screen visibility and device compatibility over absolute rigidity.

Aggregated review sentiment on this model is generally positive, with buyers frequently praising the suction strength on textured or slightly curved dashboards where flatter suction cups fail; a smaller but consistent group of reviewers note that the gooseneck can droop very slightly after several months of heavy use in hot cars.

Pros:

• ✅ Fits large phones and thick protective cases easily
• ✅ Longer gooseneck arm improves sightline for varifocal wearers
• ✅ Washable sticky-gel suction pad, renewable when it dulls

Cons:

• ❌ Slightly more wobble on rough roads than shorter arms
• ❌ Gooseneck can droop marginally after months in high heat

At under £20, this is excellent value specifically for owners of oversized phones — a category several rivals on this list quietly under-serve.

3. AUTO-T Windscreen Phone Mount — tightest budget, genuinely usable

The standout feature is simply the price-to-function ratio: a 360-degree rotating ball joint and firm glass-grip suction cup for less than the cost of a supermarket meal deal. It’s proof that “budget” doesn’t automatically mean “disposable” in this category, provided expectations are set correctly.

The cradle stretches from roughly 35mm to 85mm, which covers the overwhelming majority of phones on the market, though very large flagship devices in bulky cases can push the upper limit. The suction cup attaches directly to glass rather than being optimised for textured dashboards, so it performs best when you actually use it on the windscreen it’s named for rather than forcing it onto a plastic dash fascia.

Here’s what the spec sheet won’t tell you, but aggregated feedback suggests: at this price point, the plastic used in the ball joint is noticeably firmer than pricier alternatives, meaning the angle holds well once set but requires a bit more force to adjust — a reasonable trade-off for a mount built to a tight cost target. It’s the right call for anyone who wants a functional mount and doesn’t drive daily long distances where a slightly stiffer joint becomes an annoyance.

Reviewers frequently mention it holding securely through daily short journeys, with the main critique being that it isn’t designed to double as a dashboard mount the way pricier hybrid models are — a fair limitation given the price.

Pros:

• ✅ Genuinely low price without a flimsy build
• ✅ 360-degree ball joint for flexible viewing angles
• ✅ Strong glass-specific suction, as the name suggests

Cons:

• ❌ Stiffer joint needs more force to reposition
• ❌ Not optimised for textured dashboard surfaces

At £12-£18, this is the pick for anyone who just wants their phone off their lap and doesn’t need bells and whistles.

4. Miracase Military-Grade Mount — best for potholes and rough roads

The standout claim — “military-grade” suction — is marketing language, but the underlying engineering backs it up: a reinforced locking arm and thicker rubber gasket than most rivals at this price, aimed squarely at drivers who’ve had a mount fail on a speed bump before and don’t want a repeat.

Specs that matter in practice: the mount works on both dashboard and windscreen, with 360-degree rotation and a cradle that expands to fit phones up to roughly 6.8 inches. The reinforced arm resists the kind of gradual sag that cheaper telescopic designs develop after repeated heat cycles, which is arguably the single biggest driver of one-star reviews across this entire product category.

Based on the spec comparison, the reinforced locking mechanism is genuinely the differentiator here rather than marketing fluff — most budget mounts use a single-point suction lock, while this design distributes clamping force across a wider base, reducing the leverage that potholes and speed bumps exert on the suction seal. It’s a strong match for drivers on rural or poorly maintained roads where vibration, not heat, is the primary failure mode.

Aggregated customer sentiment repeatedly highlights stability over rough terrain as the standout strength, with a smaller number of reviewers noting the mount is bulkier than sleeker rivals — a reasonable trade for the added robustness.

Pros:

• ✅ Reinforced arm resists sagging over time
• ✅ Wide-base suction copes well with vibration and potholes
• ✅ Fits both dashboard and windscreen mounting

Cons:

• ❌ Bulkier footprint than slimmer competitors
• ❌ Reinforced build adds a little extra weight to the arm

Priced around £18-£25, this earns its place for anyone whose daily drive includes more potholes than motorway.

5. Vexloria 3-in-1 Mount — best for flexible mounting locations

The standout feature is genuine versatility: one mount, three legitimate mounting points — dashboard, windscreen, or air vent — via swappable bases, which suits anyone who isn’t sure which spot works best in their specific car until they’ve actually tried it.

The “triangle stable mode” locking technology uses a wider three-point grip on the cradle rather than a simple two-arm clamp, intended to prevent the phone shifting or scratching against the cradle edges on rough roads. Suction power is described as “ultra powerful,” and independent buyer feedback broadly supports that on clean, flat glass, though — as with every suction-based mount — performance drops noticeably on textured dashboard plastic without a mounting disc.

What most buyers overlook about 3-in-1 designs is that the flexibility comes from swapping physical bases, not from one universal mount magically working everywhere at once — you’ll want to settle on your preferred spot and leave that base fitted rather than constantly relocating it, since repeated suction-cup removal and reapplication gradually degrades cup performance. For someone still deciding between windscreen and vent mounting, though, this removes the guesswork of buying twice.

Reviewers generally rate the one-handed lock-and-release action highly for quick phone removal, with the more common criticism being that the air vent attachment feels less secure than the suction-cup option for heavier phones.

Pros:

• ✅ Three mounting options in a single purchase
• ✅ Triangle-lock cradle reduces phone shifting on bumps
• ✅ Easy one-handed lock and release

Cons:

• ❌ Air vent attachment less secure for heavier phones
• ❌ Repeated base-swapping gradually wears the suction cup

At £12-£18, this is a smart pick specifically for buyers who genuinely don’t yet know which mounting spot will suit their car.

6. ESR MagSafe Car Mount Charger — best for iPhone owners wanting wireless charging

The standout here is the combination Apple owners actually want: 15W MagSafe-certified wireless charging built directly into a windscreen or dashboard suction mount, so there’s no separate cable to fumble for once the phone clicks onto the magnets.

Specs with real-world payoff: 15W charging is meaningfully faster than the 7.5W Qi charging older mounts offered, which matters on long motorway drives where navigation and music streaming can drain a battery faster than a slow charger replenishes it. The suction base uses a reinforced gel pad rated for both dashboard and windscreen use, and — notably for this list — several ESR mounts in the wider range include active cooling to stop the phone overheating during fast wireless charging on a hot dashboard, addressing a genuine complaint about MagSafe mounts baking phones in direct sun.

Here’s what most buyers overlook: MagSafe mounts only deliver full magnetic strength with a genuine MagSafe-compatible case or an official magnetic ring; using a non-magnetic case dramatically weakens the hold, which is a common cause of the mount “not working properly” in frustrated reviews that are actually a compatibility issue rather than a product fault. For iPhone owners with a proper MagSafe case, though, this is one of the most convenient windscreen mounts on the market — no cradle to squeeze, just a satisfying magnetic click.

Aggregated review sentiment is strongly positive on charging speed and the magnetic alignment “snap,” with the main recurring criticism being reduced hold strength for heavier phone-and-case combinations without a magnetic ring attached.

Pros:

• ✅ 15W MagSafe wireless charging built into the mount
• ✅ Active cooling helps prevent overheating on hot dashboards
• ✅ One-handed magnetic attach, no cradle squeezing required

Cons:

• ❌ Needs a genuine MagSafe case or ring for full grip strength
• ❌ Weaker hold with heavier phone-and-case combinations

In the £30-£40 range, this earns its premium pricing through genuinely useful engineering rather than branding alone — provided you’re already in the Apple/MagSafe ecosystem.

7. iOttie Easy One Touch Wireless 2 — best premium all-rounder

The standout feature is flexibility of use case: this suctions to either dashboard or windscreen, works with essentially any modern smartphone regardless of MagSafe compatibility, and includes genuine 10W Qi wireless charging without requiring a special case.

The pivoting arm rotates roughly 270 degrees on top of a locking suction base, and the cradle uses iOttie’s familiar one-touch clamping mechanism rather than magnets — meaning grip strength doesn’t depend on your case at all, unlike the MagSafe-based option above. That’s a meaningful practical advantage for households with a mix of iPhone and Android devices sharing one car.

Based on the spec comparison against the standard Easy One Touch 5, the Wireless 2’s main upgrade is the built-in charging coil and slightly reinforced suction base rated for the added weight and heat generated by active charging. On paper this means marginally better long-term durability in hot cars than a basic suction mount asked to also hold a bulky separate charging cradle — everything is integrated into one engineered unit rather than bolted together.

Reviewers consistently note that the charging works reliably across both iPhone and Android Qi-enabled devices, with the more common complaint being that charging speed, while adequate, isn’t as fast as dedicated 15W MagSafe options for iPhone owners specifically.

Pros:

• ✅ Works with virtually any smartphone, no special case needed
• ✅ Mechanical clamp grip independent of magnets
• ✅ Reinforced suction base built for the extra charging weight

Cons:

• ❌ Charging speed trails dedicated 15W MagSafe rivals
• ❌ Costs noticeably more than non-charging mounts on this list

Sitting in the £40-£50 range, this is the sensible premium pick for mixed-device households or anyone who’d rather not gamble on magnetic case compatibility.

Setting Up Your Windscreen Mount: A Practical Guide

Getting a windshield phone holder car mount to actually last starts well before you ever drive off. Clean the glass with an alcohol wipe rather than a household cleaner with ammonia in it — ammonia leaves a residue that actively fights suction, which is a surprisingly common reason a brand-new mount fails within the first week. Press the suction cup on, flip the locking lever, then give it a firm downward tug to confirm the seal before you trust it with your phone.

Positioning matters as much as installation technique. Aim for the lowest point on the windscreen that still gives you a clear glance — closer to the dashboard rather than up near eye level — which keeps you compliant with UK visibility rules covered in the legal section below, and also reduces the leverage that bumps exert on the suction seal (a mount fixed high up has more “swing” and more strain on the cup than one fixed low). During the first 30 days, resist the urge to relocate the mount repeatedly; each removal and reapplication of a suction cup marginally reduces its grip until the surface is cleaned again.

A quick maintenance habit pays off: wipe both the glass and the suction cup itself with a damp cloth every couple of weeks, especially if you park outdoors, since dust settling on the cup’s rim is one of the most common — and most overlooked — causes of gradual slippage. If your telescopic arm has started drifting out of position on its own, it usually means the tension screw at the pivot has loosened rather than the arm itself failing; a quarter-turn tightening with a small screwdriver typically resolves it in under a minute.

Fixing the Problems Everyone Actually Searches For

Three complaints dominate reviews and forums for every windscreen mount for phone accessory on the market, so let’s deal with each honestly.

Mount falling off in heat. UK car interiors can climb well past 50°C on a sunny day even when the outside temperature is a mild 20-something, and parked-car temperatures in direct summer sun have been recorded reaching 70-80°C on the dashboard surface in extreme cases. Suction cup rubber softens as it heats, and softened rubber loses its ability to hold a vacuum seal — which is precisely why budget mounts with thin, basic rubber cups fail on hot days while silicone-based cups with a locking lever hold on. If your mount keeps dropping in warm weather, check whether the cup material is genuinely silicone (flexible but not tacky-soft to the touch) rather than a cheaper rubber blend, and always use the locking lever fully rather than relying on suction alone.

Suction cup not sticking, fix. This is almost always a surface-contamination problem rather than a product fault. The vacuum a suction cup creates depends on trapping a sealed pocket of air and removing it — a principle governed by basic gas pressure physics — and any dust, grease, or old adhesive residue on either the glass or the cup breaks that seal before it forms. Clean both surfaces with isopropyl alcohol, let them dry completely (residual moisture matters too), then reapply with firm, even pressure and lock the lever before releasing. If the cup itself looks glazed, shiny, or slightly warped, it’s genuinely worn out — a light rinse under warm water and gentle towel-dry restores tackiness on most silicone and gel cups, though badly degraded cups need replacing.

Telescopic arm adjustment. Most telescopic arms extend via a twist-lock or push-button collar, and the number one mistake is over-extending the arm to its maximum reach, which increases wobble and strain on every joint below it. Extend only as far as needed to clear the steering wheel and dashboard trim, then tighten any adjustment screw at the ball joint firmly — a loose ball joint is the most common cause of a phone that slowly droops downward over a journey. If your specific arm has drifted permanently out of alignment, most manufacturers sell replacement joint kits rather than requiring a full mount replacement.

What Is a Windshield Phone Holder Car Mount?

A windshield phone holder car mount is a bracket, usually attached by suction cup or adhesive pad, that secures a smartphone to the interior of the windscreen at a fixed, adjustable angle for hands-free viewing while driving. Most use a telescopic or gooseneck arm and either a mechanical clamp or magnetic plate to hold the phone itself.

How to Choose a Windscreen Mount for Phone Use

1. Check your phone’s width and weight against the cradle spec — a mount rated for phones up to 85mm won’t comfortably or safely hold a large flagship in a rugged case.
2. Prioritise a locking lever over plain suction — this single mechanical feature is the biggest predictor of whether a mount survives a British summer.
3. Match the arm length to your dashboard depth — a longer gooseneck suits a deep dashboard; a short telescopic arm suits compact cars where reach isn’t the issue.
4. Decide if wireless charging is worth the premium — genuinely useful on long drives, but adds cost and, for MagSafe options, case-dependency.
5. Consider your typical road surfaces — reinforced, wide-base mounts like the Miracase model handle pothole-heavy routes noticeably better than standard designs.
6. Think about mounting position for legal compliance — a mount that only suctions high on the glass limits your placement options; flexibility to mount low matters (see the legal section below).
7. Read aggregated review themes, not star ratings alone — a 4.3-star average tells you little; a recurring theme about heat failure or cradle stiffness tells you a lot.

Windscreen Mounts vs Dashboard and Air Vent Mounts

The trade-off here is fairly stark once you interpret the table rather than just skim it: windscreen mounts like the iOttie Easy One Touch 5 and APPS2Car Windscreen Mount give you the best sightline for glancing at navigation without lowering your eyes far, but they’re also the mounting style most exposed to direct sun and therefore most vulnerable to heat-related suction failure. Air vent options sidestep both the legal grey area and the heat problem, at the cost of a lower, less convenient viewing angle and a mechanical clip that can loosen on older or thinner vent blades. For most UK drivers doing regular navigation, a low-mounted windscreen option like the AUTO-T Windscreen Phone Mount strikes the best balance — genuinely clear sightline without creeping up into the swept wiper zone that regulators actually care about.

✨ Found your match? Check today’s availability and current pricing before you head out.

Is It Legal to Mount a Phone Holder on Your Windscreen in the UK?

Short answer: yes, but with real constraints worth understanding rather than guessing at. Under Regulation 30 of the Road Vehicles (Construction and Use) Regulations 1986, every motor vehicle must be maintained so the driver has a full view of the road ahead, and windscreens must not be obscured while the vehicle is in use. There’s no rule naming phone mounts specifically, but the Highway Code’s requirement that windscreens stay “clean and free from obstructions to vision” is what enforcement actually hangs on.

In practice, RAC guidance confirms that it isn’t illegal to have a phone on your dashboard or windscreen provided it doesn’t block your view of the road and traffic ahead, and a properly fixed mount is explicitly recommended over holding a phone by hand. The practical advice from Halfords’ guidance on sat nav placement is to mount low, in the bottom corner or lowest central point of the windscreen, rather than up near eye level where cables and the mount itself can genuinely obstruct sightlines and airbag zones. Get this wrong and you’re risking an on-the-spot fine, but get it right — low, out of the wiper’s swept area, cables tucked away — and a windscreen mount is both legal and, per RAC’s own recommendation, safer than the alternative of a loose phone in your lap.

Common Mistakes When Buying a Windshield Phone Holder Car Mount

The single most common mistake is buying based on star rating alone rather than reading what the negative reviews actually describe — a mount with a 4.4-star average and a cluster of one-star reviews specifically about heat failure is telling you something the headline number hides. Second is ignoring cradle width relative to your actual phone-plus-case combination; a mount rated “universal” that maxes out at 85mm simply won’t fit a large flagship in a rugged case, no matter how good the suction is. Third, and surprisingly common, is buying a magnetic MagSafe mount without owning a genuine MagSafe case, then blaming the mount when grip strength disappoints — the magnets need a matching magnetic plate to perform as advertised. Finally, plenty of buyers skip checking arm length against their specific dashboard depth, ending up with a mount that either can’t reach a comfortable position or extends so far it wobbles constantly on rough roads.

Windscreen Phone Holders for Different Types of Drivers

The daily commuter relying on navigation apps for a 20-30 minute drive through changing traffic benefits most from something like the iOttie Easy One Touch 5 — quick one-handed mounting matters more than premium charging when you’re doing this twice a day, five days a week.

The long-distance road-tripper, covering motorway miles where phone battery drains fast from constant GPS and music streaming, gets genuine value from the charging built into the ESR MagSafe Car Mount Charger or iOttie Easy One Touch Wireless 2 — arriving with a full battery beats arriving with 20% and no charger cable to hand.

The budget-conscious student or new driver, often driving an older car with a tighter budget and less concern about bells and whistles, is well served by the AUTO-T Windscreen Phone Mount or Vexloria 3-in-1 Mount — solid function without paying for features that go unused.

Long-Term Cost and Maintenance

A £15 budget mount replaced every 12-18 months as the suction cup degrades works out to a similar total cost of ownership as a £30-£40 mount with a genuinely reinforced silicone cup that lasts three to four years — the maths favours spending slightly more upfront if you’re a daily user, and favours the cheaper option if the mount only comes out for the occasional long trip. Charging-integrated mounts add a small ongoing value most buyers don’t factor in: a separate 15W car charger and cable typically cost £10-£15 alone, so a mount that bundles charging in is rarely the “expensive” option it first appears once you account for what you’d otherwise buy separately. Maintenance costs are close to zero regardless of price point — an occasional alcohol wipe and, eventually, a cheap replacement suction cup or gel pad (often under £5) rather than a whole new mount.

A Buyer’s Decision Framework

If you drive daily and hate fiddling, choose a mechanical one-touch cradle like the iOttie Easy One Touch 5 because speed and reliability matter more than novelty. If you’re an iPhone owner already invested in MagSafe cases, choose the ESR MagSafe Car Mount Charger because the magnetic convenience and charging speed genuinely outperform cradle-based options for that specific ecosystem. If your budget is under £20 and you just need something functional, choose the AUTO-T Windscreen Phone Mount or Vexloria 3-in-1 Mount because paying more buys marginal upgrades you may not need. If your commute includes rough, pothole-heavy roads, choose the Miracase Military-Grade Mount because its reinforced base is specifically engineered for vibration resistance over sleekness.

Frequently Asked Questions

Conclusion

There’s no single “best” windshield phone holder car mount — there’s a best one for your phone size, your budget, your daily route, and how much you value charging built in versus keeping things simple. What separates a mount that lasts years from one that’s back in a drawer within a month usually isn’t the price tag; it’s whether the suction cup is genuine silicone with a locking lever, whether the cradle actually fits your phone-and-case combination, and whether you’ve mounted it low enough to stay both legal and structurally sound against heat and vibration.

Of the seven covered here, the iOttie Easy One Touch 5 remains the most sensible all-round pick for most UK drivers, the AUTO-T Windscreen Phone Mount proves budget doesn’t mean flimsy, and the ESR MagSafe Car Mount Charger or iOttie Easy One Touch Wireless 2 earn their premium pricing for anyone who actually needs charging on the move. Match the mount to your driving pattern rather than chasing the highest star rating, and the mount problems that bring most people to this page — falling off in heat, suction that won’t stick, an arm that won’t hold position — become largely avoidable.

Recommended for You

• Windscreen Phone Mount: 7 Best Picks Tested for UK Drivers 2026
• Strongest Magnetic Phone Holder Car: 7 Tested Picks for 2026
• Magsafe Car Mount: 7 Best Picks for UK Drivers in 2026

Disclaimer: This article contains affiliate links. As an Amazon Associate, I earn from qualifying purchases. If you purchase products through these links, we may earn a small commission at no additional cost to you.

✨ Found this helpful? Share it with your friends! 💬🤗